Click Arc Flash Coveralls are Fire retardant, Anti-static and has ARC Flash. 300gsm 60/40 Modacrylic/cotton blend. Triple stitch construction. Two hip pockets. Rear patch pocket with hook and loop closure flap. Large bellows pocket to each leg with hook and loop closure flap. Right leg mobile phone pocket with hook and loop closure flap. All pocket flaps with Retro-reflective tape feature. Internal knee pad pouches. Large qualifying icons on left leg pocket. EN ISO 13688:2013 - General requirements for protective clothing. EN 1149-3:2004 - Anti Static - Test methods for measurements of charge decay. EN 1149-5:2008 - Anti Static - Material performance and design requirements. EN ISO 11611:2007 (Class 1 A1 A2) - Protective clothing for use in welding. EN ISO 11612:2008 (A1 A2 B1 C1) - Protection against heat and flame. ARC FLASH. IEC 61482-2:2009 - Performance requirements and design requirements. EN 61482-1-2:2007 (Class 1 = 4kA) - Box Arc testing. EN 61482-1-1:2009 (ATPV = 10.8 Cal/cm2) - Open Arc testing. Each garment style is independently tested to both box and open ARC standards. Click ARC production is covered by article 11B certification. Does NOT conform to EN ISO 20471. WorkwearGBP145958
Click Arc Flash Coveralls are Fire retardant, Anti-static and has ARC Flash
300gsm 60/40 Modacrylic/cotton blend
Triple stitch construction
Two hip pockets
Rear patch pocket with hook and loop closure flap
Large bellows pocket to each leg with hook and loop closure flap
Right leg mobile phone pocket with hook and loop closure flap
All pocket flaps with Retro-reflective tape feature
Internal knee pad pouches
Large qualifying icons on left leg pocket
EN ISO 13688:2013 - General requirements for protective clothing
EN 1149-3:2004 - Anti Static - Test methods for measurements of charge decay
EN 1149-5:2008 - Anti Static - Material performance and design requirements
EN ISO 11611:2007 (Class 1 A1 A2) - Protective clothing for use in welding
EN ISO 11612:2008 (A1 A2 B1 C1) - Protection against heat and flame
ARC FLASH
IEC 61482-2:2009 - Performance requirements and design requirements
EN 61482-1-2:2007 (Class 1 = 4kA) - Box Arc testing
EN 61482-1-1:2009 (ATPV = 10.8 Cal/cm2) - Open Arc testing
Each garment style is independently tested to both box and open ARC standards
Click ARC production is covered by article 11B certification
Does NOT conform to EN ISO 20471
Fire retardant
All pocket flaps with retro-reflective tape feature
Internal knee pad pouches
EN ISO 13688:2013 - General requirements for protective clothing. EN 1149-3:2004 - Anti Static - Test methods for measurements of charge decay. EN 1149-5:2008 - Anti Static - Material performance and design requirements. EN ISO 11611:2007 (Class 1 A1 A2) - Protective clothing for use in welding. EN ISO 11612:2008 (A1 A2 B1 C1) - Protection against heat and flame
ARC FLASH. IEC 61482-2:2009 - Performance requirements and design requirements. EN 61482-1-2:2007 (Class 1 = 4kA) - Box Arc testing. EN 61482-1-1:2009 (ATPV = 10.8 Cal/cm2) - Open Arc testing
Each garment style is independently tested to both box and open ARC standards
Click ARC production is covered by article 11B certification
Does NOT conform to EN ISO 20471
Anti-static
ARC Flash coverall
300gsm 60/40 Modacrylic/cotton blend
Triple stitch construction
Two hip pockets
Rear patch pocket with hook and loop closure flap
Large bellows pocket to each leg with hook and loop closure flap
Right leg mobile phone pocket with hook and loop closure flap
StandardsEN ISO 13688:2013 EN 1149-3:2004 EN 1149-5:2008 EN ISO 11611:2007 (Class 1 A1 A2) EN ISO 11612:2008 (A1 A2 B1 C1) ARC FLASH IEC 61482-2:2009 EN 61482-1-2:2007 (Class 1 = 4kA) - Box Arc testing EN 61482-1-1:2009 (ATPV = 10.8 Cal/cm2) Does NOT conform to EN ISO 20471
FasteningZip
EN Standard CodeEN ISO 13688:2013 EN 1149-3:2004 EN 1149-5:2008 EN ISO 11611:2007 (Class 1 A1 A2) EN ISO 11612:2008 (A1 A2 B1 C1) ARC FLASH IEC 61482-2:2009 EN 61482-1-2:2007 (Class 1 = 4kA) - Box Arc testing EN 61482-1-1:2009 (ATPV = 10.8 Cal/cm2) Does NOT conform to EN ISO 20471